F405 F405HD / F7 F722 Flight Controller / F4 V3S Plus FC + 60A 4in1 BLheli_S ESC Stacks 30.5*30.5mm For RC FPV Racer Drone

(50 customer reviews)

$84.93$236.71

SKU: 3256806863696767 Category: Tag:

Description

  • Hign-concerned Chemical: None
  • Is Electric: No battery
  • Technical parameters: Value 5
  • Model Number: F405 / F722 / F4 V3S Plus Flight Controller + 60A ESC
  • For Vehicle Type: Airplanes
  • Tool Supplies: Battery
  • Four-wheel Drive Attributes: Motors
  • Remote Control Peripherals/Devices: ESC
  • Upgrade Parts/Accessories: Frame
  • RC Parts & Accs: Motor Components
  • Material: Composite Material
  • Brand Name: Readytosky
  • Origin: Mainland China
  • Recommend Age: 14+y
  • Use: Vehicles & Remote Control Toys
 
 
 
Package Included: (Send it as your choice, as the option shown)

F4 V3S Plus Flight controller:

Item name: F4 V3 PLUS Flight Controller
Firmware: OMNIBUSF4SD
Size: 36x36mm
Mounting holes: 30.5×30.5mm
STM32 F405 MCU
Dshot support
Drag and Drop OSD configured via Betaflight
MPU: MPU6500 / MPU6000   (Send at random)
 
SBUS / PPM AND Spketrum DSMX ports
MicroSD card blackbox
Baro (BMP280)
5v3a 9V3A BEC
On-board video filters (only 5V to VTX and camera)
Boasting a F4 processor, on-board Betaflight OSD, MicroSD Black Box, 5v3a sbec, video filter, you'll be tuning pids with your transmitter and
Tear it to the track in no time!
Note:
1. The F4 V3S Plus Flight Controller only support Betaflight software, and we do not suggest to adjust the parameters.
2. There are two kinds of flight controller board, we will ship it at random.

F4 F405 Flight Controller:

Product Parameters:

MCU: STM32F405RGT6 168MHz

Gyroscope: Mpu6500/ICM42688 (send at random)

Baro:Bmp280

OSD: Betaflight SPI OSD DJI HD OSD(UART5)

Black box: 16MB

6x Uarts: UART 1/2/3/4/5/6

4x PWM outputs

1x I2C

2x LEDs for FC STATUS (Blue) and 3.3V indicator(Red) and 5V indicator(Red) and 9V indicator(Red)

USB Type-C(USB2.0)

1x JST-SH1.0_8pin connector (Gnd/Vbat/S1/S2/S3/S4/Curr/Rx3)

1x JST-SH1.0_6pin connector (9V/GND/T5/R5/GND/R2)

VTX 9V filtered power

DJI FPV OSD is supported by any spare UART

LED: 4 LED independent pads, support WS2812 programming lamp output.

Receiver: Support Sbus, crsf, ibus, SBUS, XBUS receiver,
The default receiver input is UART2(You can solder ELRS RX on UART2).

Power:

Input voltage: 3-6S

BEC: 5V/10V 3A max dual-channel BEC supports stable power supply on the sky side of DJI

LDO 3.3V: Max.1A

FC Firmware:

BetaFlight firmware: DAKEFPVF405

INAV firmware:DAKEFPVF405

Mounting:

Installation size: 30.5mm × 30.5mm The installation hole is M4 and supports shock column installation

External size 36mm × 36mm

Flight control weight: 6.9g

Flight control onboard voltage sensor.


 
F7 Flight Controller Specifications:

 
MCU: STM32F722RET6 216MHz
 
Gyroscope: Mpu6500
 
Baro:Bmp280
 
OSD: Betaflight SPI OSD DJI HD OSD(UART5)
 
Black box: 16MB
 
6x Uarts: UART 1/2/3/4/5/6
 
4x PWM outputs
 
1x I2C
 
2x LEDs for FC STATUS (Blue) and 3.3V indicator(Red) and 5V indicator(Red) and 9V indicator(Red)
 
USB Type-C(USB2.0)
 
1x JST-SH1.0_8pin connector (Gnd/Vbat/S1/S2/S3/S4/Curr/Rx3)
 
1x JST-SH1.0_6pin connector (9V/GND/T5/R5/GND/R2)
 
VTX 9V filtered power
 
DJI FPV OSD is supported by any spare UART
 
LED: 4 LED independent pads, support WS2812 programming lamp output.
 
Receiver: Support Sbus, crsf, ibus, SBUS, XBUS receiver,
 
The default receiver input is UART2(You can solder ELRS RX on UART2), F7 has a built-in inverter, which can actually be installed in any spare UART.
 
Power:
 
Input voltage: 3-6S
 
BEC: 5V/10V 3A max dual-channel BEC supports stable power supply on the sky side of DJI
 
LDO 3.3V: Max.1A
 
FC Firmware:
 
BetaFlight firmware:DAKEFPVF722
 
INAV firmware:DAKEFPVF722
 
Mounting:
 
Installation size: 30.5mm × 30.5mm The installation hole is M4 and supports shock column installation
 
External size 36mm × 36mm
 
Flight control weight: 6.9g
 
Flight control onboard voltage sensor.
 
 

BLHeli-S 60A 3-6S DShot600 4-in-1 ESC:

Support Dshot600, Dshot300, Dshot150, Oneshot125, Multishot, PWM control signal

Power supply voltage: 3-6S (12-26V)

Continuous working current: 60A

No built-in 5V BEC output

Firmware: BLHeli-S

Screw hole spacing: 30.5*30.5MM

Aperture: 4MM

Weight: 14.6g

The ESC has an on-board filter capacitor that suppresses the back electromotive force, stabilizes the battery voltage, and protects the flight control ESC precision components.

– EMI Shell provides stronger anti-interference capability.

Note :There are two kinds of esc board, we will ship it at random.

 

Additional information

Hign-concerned Chemical

None

Is Electric

No battery

Technical parameters

Value 5

Model Number

F405 / F722 / F4 V3S Plus Flight Controller + 60A ESC

For Vehicle Type

Airplanes

Tool Supplies

Battery

Four-wheel Drive Attributes

Motors

Remote Control Peripherals/Devices

ESC

Upgrade Parts/Accessories

Frame

RC Parts & Accs

Motor Components

Material

Composite Material

Brand Name

Readytosky

Origin

Mainland China

Recommend Age

14+y

Use

Vehicles & Remote Control Toys

50 reviews for F405 F405HD / F7 F722 Flight Controller / F4 V3S Plus FC + 60A 4in1 BLheli_S ESC Stacks 30.5*30.5mm For RC FPV Racer Drone

There are no reviews yet.

Be the first to review “F405 F405HD / F7 F722 Flight Controller / F4 V3S Plus FC + 60A 4in1 BLheli_S ESC Stacks 30.5*30.5mm For RC FPV Racer Drone”

Your email address will not be published. Required fields are marked *

Your recently viewed items